Talks Submitted for the Plasma-Materials Interactions Community Workshop

SpeakerInstitutionTitle
A. Anders LBNL Unipolar arcs on the first wall: gaining deeper understanding of arc ignition conditions and development of arc-prevention strategies
D. Andrucyzk UIUC Liquid Metal's Role to Improve Power Handling through Engineering Innovation
T.M. Biewer (by D. Donovan) ORNL PMI Diagnostic Development Needs
D. Buchenauer SNLL Neutral H sensor for C-X H flux on wall and divertor
J.M. Canik ORNL Model validation needs in boundary physics
J.B. Caughman ORNL Reliable Long-Pulse Plasma Heating and Current Drive using ICRF
C.S. Chang PPPL Importance of SOL plasma kinetic information for more reliable PMI data
C.S. Chang PPPL Importance of kinetic physics in core-edge integration
D. Currelli UIUC Challenges and strategies to experimental validation of multi-scale nuclear fusion PMI computational modeling
G. deTemmermen ITER PWI research needs for ITER
L. Garrison ORNL Development of advanced tungsten and alternative materials through advanced manufacturing
S.H. Glenzer Stanford Opportunities for fusion material science studies at LCLS
R.J. Goldston PPPL An Example Opportunity for DIvertor Innovation: The Lithium Vapor-Box Divertor
R.H. Goulding ORNL A multiply-heated RF plasma source for a novel linear divertor simulator
Z.S. Hartwig (by G. Wright) MIT The necessity to advance diagnostics for plasma-facing component surfaces
I.H. Hutchinson MIT Divertor Detachment Basic Physics
Y. Katoh ORNL Impact of Neutron Irradiation on Plasma-Materials Interactions
B.E. Koel Princeton Liquid Metals As Plasma-Facing Materials For Fusion Energy Systems
M. Kotschenreuther UT-A Implications of Recent SOL Projections, and Tungsten Sputtering, on Tolerable ELM size: SOL physics, and plate design
M. Kotschenreuther UT-A Cumulative sensitivity of high Q operaiton on ITER and burning plasmas to issues of integrated operation
S.I. Krasheninnikov UCSD Detachment 101
P. Krstic SUNY Integrated, Multi-Scale Plasma-Material Interface Simulation
B. LaBombard MIT ADX: a high field, high power density, advanced divertor and RF tokamak
A. Lumsdaine ORNL Engineering Enhanced Heat Transfer Materials
R. Majeski PPPL Test stands for liquid metal PFC development
R. Majeski PPPL Lithium walls for fusion
R. Majeski PPPL Low recycling walls and confinement
J.E. Menard PPPL Potential challenges, research needs, and solutions for core-edge integration
J.R. Myra Lodestar Understanding the SOL: Fundamental Physics Challenges
I. Nunes (Invited) EFDA JET results with the ILW
R.E. Nygren SNLA A New Vision for Materials, In-vessel Components and Diagnostics for the Plasma Edge
R.E. Nygren SNLA Advance Manufacturing and Engineered Materials - A new vision for materials and PFC development
R.E. Nygren SNLA Smart Tiles and MEMS-based sensors - new age of wall/edge diagnostic
R.E. Nygren SNLA Understanding Design Integration to Confirm the Credibility of Liquid Surface PFCs
C.M. Parish ORNL Qualifying materials' response to plasma-materials interaction
M.J. Pellin ANL Extreme Materials (XMAT) Beam Line for In Situ Examination of Radiation Damage
J. Rapp ORNL Integrated PMI R&D with a multi-device approach
T. Schenkel (by A. Anders) LBNL Multi-scale and time-resolved studies of point defect dynamics in materials, to further the understanding of PMI for fusion
E. Scime WVU Two Photon Absorption Laser Induced Fluorescence Measurements of Neutral Hydrogen in the Tokamak Edge
M. Shimada INL Tritium and Nuclear Sciences Initiative for Burning Plasma Long Pulse PMI
J. Singh PSU Fabrication of Net-shaped Functional Graded Nano-dispersion Strengthened Tungsten Alloys for Structural Applications in Fusion Energy
C.H. Skinner PPPL Coordinated experimental-modeling approach to low-risk PFCs for FNSF/DEMO
V.A. Soukhanovskii LLNL Snowflake divertor
V.A. Soukhanovskii LLNL Control of radiative divertor and detachment
J. Terry MIT Challenges for integrating power-handling constraints and those of a high-performance core
G.R. Tynan UCSD Addressing PMI Challenges with Complementary Linear Device and Confinement Device Studies
F. Volpe Columbia Feedback Stabilization of Flowing, Electromagnetically Restrained Liquid Metal Walls
Y.Q. Wang Controlled He release through nanocomposite materials design
D.G. Whyte MIT Assessment of reactor PMI science in small-scale devices
D.G. Whyte MIT Achieving and exploring reactor-level PMI simulation in small-scale devices
D.G. Whyte MIT Plasma-facing engineering solutions enabled by modularity & demountable coils
B.D. Wirth UT-K Status of Modeling Plasma - Materials Interactions: Unresolved Issues & Future Opportunities
G. Wright MIT Operation of a tokamak with a hot wall
S. Wukitch (remote) MIT PMI Challenges and Path towards RF Sustainment of Steady State Fusion Reactor Plasmas
X.Q. Xu LLNL Develop a Validated Predictive Modeling Capability for Localized Transient Events under Detached Divertor Operations
L.E. Zakharov PPPL Flowing Liquid Lithium (24/7FLiLi): the technology  step to  burning plasma regimes
Privacy Policy
Who's in the USBPO News and Events References and Links Media Forums Contact Us